> For the complete documentation index, see [llms.txt](https://jollyproxy.gitbook.io/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://jollyproxy.gitbook.io/docs/proxy-configuration/operating-system-configuration-guide/android.md).

# Android

{% hint style="danger" icon="exclamation" %}
**Usage Notice:** All JollyProxy proxy products must be used in an overseas network environment. Please ensure that you have configured the corresponding overseas network environment yourself.
{% endhint %}

Before integrating the proxy into your Android device, please make sure you have obtained valid proxy service information and have confirmed that the proxy service is running properly.

### Steps

### 1. Go to Wi-Fi Settings

Open your phone's **Settings** → tap **WLAN** or **Wi-Fi** (names may vary slightly depending on the brand).

<div align="left"><figure><img src="https://779989668-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwsS3NgJFgFQvWFmv0zaY%2Fuploads%2FYqsjebtU8oW9WEIXHzAc%2Fimage.png?alt=media&#x26;token=5b66cf5a-43c3-4456-bac2-850d8598b33f" alt="" width="563"><figcaption></figcaption></figure></div>

### 2. Go to the Connected Network Configuration

In the Wi-Fi list, find the network you are currently connected to, tap the **settings icon** on the right, or long-press the network and select **Modify network** or **Advanced options**.

<div align="left"><figure><img src="https://779989668-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwsS3NgJFgFQvWFmv0zaY%2Fuploads%2FujYCmNGQCT8uj3fkN5af%2Fimage.png?alt=media&#x26;token=b461049c-569e-4246-98c1-8eeac9b01881" alt="" width="563"><figcaption></figcaption></figure></div>

### 3. Configure the Proxy Server

1. In the advanced settings, find the **Proxy** option and set it to **Manual**.
2. Fill in the following information:
   * **Hostname**: Proxy server IP address or domain name
   * **Port**: Proxy service port number
3. Tap **Save** or **OK** in the upper-right corner to complete the setup.

<div align="left"><figure><img src="https://779989668-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwsS3NgJFgFQvWFmv0zaY%2Fuploads%2FfQ08pBmFoQOduSXipYCh%2Fimage.png?alt=media&#x26;token=58fbad2d-dfee-44b2-af32-1b6cf0729bd9" alt="" width="563"><figcaption></figcaption></figure></div>

> **Tip**: Some Android systems may require you to expand **Advanced options** first before you can see the proxy settings.

### 4. Enter Authentication Information (If Required)

If the proxy service requires username and password authentication, the system will usually display an authentication window when you first access the network. You can also visit any webpage in your browser and enter your username and password when prompted.

<div align="left"><figure><img src="https://779989668-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwsS3NgJFgFQvWFmv0zaY%2Fuploads%2FnSXxKEJQI5zcXvnvwgMd%2Fimage.png?alt=media&#x26;token=f478729f-b2bd-42db-b60c-b03449a2f2c8" alt=""><figcaption></figcaption></figure></div>

### 5. Verify the Proxy Connection

Open any browser (such as Chrome) and visit an IP detection website to check whether the displayed IP address matches the proxy IP you configured. If they match, the proxy setup is successful.

### Notes

* This is a **Wi-Fi level proxy**, which only applies to the current Wi-Fi network.
* After switching Wi-Fi networks, you need to reconfigure the proxy.
* Please ensure that the proxy server supports your use case and that the information is entered correctly.

> **You have now successfully completed Wi-Fi proxy configuration on your Android device and can access the network through the proxy server.**


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://jollyproxy.gitbook.io/docs/proxy-configuration/operating-system-configuration-guide/android.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.